Black neoprene non-sanitary protection anti-contamination mask. Breathable fabric that prevents water or saliva from penetrating the fabric. Customizable from 25 units.
Warning: Last items in stock!
|50||9,45 €||Up to 52,50 €|
|100||7,88 €||Up to 262,50 €|
|Tiempo de producción||7 a 10 días|
White neoprene non-sanitary protection anti-contamination mask.
Breathable fabric that prevents water or saliva from penetrating the fabric.
Customizable on one or both sides of the seam.
Indicates its composition, type of finish and additions, necessary tests, results and manufacturing process.
It corroborates that the fabric admits printing, its proper preparation and handling, making it a product suitable for the generic public.
It certifies that the tissue has undergone laboratory protocols and is considered water-repellent, with high and very high intolerance levels for tests of water and all kinds of liquids.
Regulated conclusions for art 5168 for white neoprene masks: Fabric check and protection of 92.5% certified standard EN0065> 90% (Bacterial Filtration Efficiency). Total absence of any negative note / level.
The Ministry of Health has published a guide for cleaning and disinfecting reusable hygienic hydrophobic masks. There are three options:
The first of these is washing and disinfecting the masks with normal detergent and water at a temperature between 40 and 60 degrees and in a normal washing machine cycle.
The second is based on soaking the masks in a 1:50 bleach dilution with warm water for 30 minutes. Then wash with soap and water and rinse well to remove any remaining bleach and allow to dry.
The third method is the use of any of the virucidal products authorized by the Ministry of Health for PT2 (environmental use) that have passed the Norm 14476 of virucidal activity and are registered for use by the general public. You can check the list of these products.
Following the manufacturer's recommendations and paying special attention to the diluted or not use of the product and the contact times necessary for the disinfecting activity. After the completion of this procedure, the masks will be washed with plenty of soap and water to remove any chemical residue and allowed to dry.